168 Equilibrium Constants
Paul Flowers; Edward J. Neth; William R. Robinson; Klaus Theopold; and Richard Langley
[latexpage]
The status of a reversible reaction is conveniently assessed by evaluating its reaction quotient (Q). For a reversible reaction described by
the reaction quotient is derived directly from the stoichiometry of the balanced equation as
where the subscript c denotes the use of molar concentrations in the expression. If the reactants and products are gaseous, a reaction quotient may be similarly derived using partial pressures:
Note that the reaction quotient equations above are a simplification of more rigorous expressions that use relative values for concentrations and pressures rather than absolute values. These relative concentration and pressure values are dimensionless (they have no units); consequently, so are the reaction quotients. For purposes of this introductory text, it will suffice to use the simplified equations and to disregard units when computing Q. In most cases, this will introduce only modest errors in calculations involving reaction quotients.
Writing Reaction Quotient Expressions Write the concentration-based reaction quotient expression for each of the following reactions:
(a) \(3{\text{O}}_{2}\left(g\right)⇌2{\text{O}}_{3}\left(g\right)\)
(b) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)
(c) \(4{\text{NH}}_{3}\left(g\right)+7{\text{O}}_{2}\left(g\right)⇌4{\text{NO}}_{2}\left(g\right)+6{\text{H}}_{2}\text{O}\left(g\right)\)
Solution (a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{O}}_{3}\right]}^{2}}{{\left[{\text{O}}_{2}\right]}^{3}}\)
(b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{NH}}_{3}\right]}^{2}}{\left[{\text{N}}_{2}\right]{\left[{\text{H}}_{2}\right]}^{3}}\)
(c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{NO}}_{2}\right]}^{4}\left[{\text{H}}_{2}\text{O}{\right]}^{6}}{{\left[{\text{NH}}_{3}\right]}^{4}\left[{\text{O}}_{2}{\right]}^{7}}\)
Check Your Learning Write the concentration-based reaction quotient expression for each of the following reactions:
(a) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)
(b) \({\text{C}}_{4}{\text{H}}_{8}\left(g\right)⇌2{\text{C}}_{2}{\text{H}}_{4}\left(g\right)\)
(c) \(2{\text{C}}_{4}{\text{H}}_{10}\left(g\right)+13{\text{O}}_{2}\left(g\right)⇌8{\text{CO}}_{2}\left(g\right)+10{\text{H}}_{2}\text{O}\left(g\right)\)
(a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{SO}}_{3}\right]}^{2}}{{\left[{\text{SO}}_{2}\right]}^{2}\left[{\text{O}}_{2}\right]};\) (b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{C}}_{2}{\text{H}}_{4}\right]}^{2}}{\left[{\text{C}}_{4}{\text{H}}_{8}\right]};\) (c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{CO}}_{2}\right]}^{8}\left[{\text{H}}_{2}\text{O}{\right]}^{10}}{{\left[{\text{C}}_{4}{\text{H}}_{10}\right]}^{2}\left[{\text{O}}_{2}{\right]}^{13}}\)
The numerical value of Q varies as a reaction proceeds towards equilibrium; therefore, it can serve as a useful indicator of the reaction’s status. To illustrate this point, consider the oxidation of sulfur dioxide:
Two different experimental scenarios are depicted in (Figure), one in which this reaction is initiated with a mixture of reactants only, SO2 and O2, and another that begins with only product, SO3. For the reaction that begins with a mixture of reactants only, Q is initially equal to zero:
As the reaction proceeds toward equilibrium in the forward direction, reactant concentrations decrease (as does the denominator of Qc), product concentration increases (as does the numerator of Qc), and the reaction quotient consequently increases. When equilibrium is achieved, the concentrations of reactants and product remain constant, as does the value of Qc.
If the reaction begins with only product present, the value of Qc is initially undefined (immeasurably large, or infinite):
In this case, the reaction proceeds toward equilibrium in the reverse direction. The product concentration and the numerator of Qc decrease with time, the reactant concentrations and the denominator of Qc increase, and the reaction quotient consequently decreases until it becomes constant at equilibrium.
The constant value of Q exhibited by a system at equilibrium is called the equilibrium constant, K:
Comparison of the data plots in (Figure) shows that both experimental scenarios resulted in the same value for the equilibrium constant. This is a general observation for all equilibrium systems, known as the law of mass action: At a given temperature, the reaction quotient for a system at equilibrium is constant.
Evaluating a Reaction Quotient Gaseous nitrogen dioxide forms dinitrogen tetroxide according to this equation:
When 0.10 mol NO2 is added to a 1.0-L flask at 25 °C, the concentration changes so that at equilibrium, [NO2] = 0.016 M and [N2O4] = 0.042 M.
(a) What is the value of the reaction quotient before any reaction occurs?
(b) What is the value of the equilibrium constant for the reaction?
Solution As for all equilibrium calculations in this text, use the simplified equations for Q and K and disregard any concentration or pressure units, as noted previously in this section.
(a) Before any product is formed, \(\left[{\text{NO}}_{2}\right]=\phantom{\rule{0.2em}{0ex}}\frac{0.10\phantom{\rule{0.2em}{0ex}}\text{mol}}{1.0\phantom{\rule{0.2em}{0ex}}\text{L}}\phantom{\rule{0.2em}{0ex}}=0.10\phantom{\rule{0.2em}{0ex}}M,\) and [N2O4] = 0 M. Thus,
(b) At equilibrium, \({K}_{c}={Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{N}}_{2}{\text{O}}_{4}\right]}{{\left[{\text{NO}}_{2}\right]}^{2}}=\phantom{\rule{0.2em}{0ex}}\frac{0.042}{{0.016}^{2}}\phantom{\rule{0.2em}{0ex}}=1.6\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{2}.\) The equilibrium constant is 1.6 \(×\) 102.
Check Your Learning For the reaction \({\text{2SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌{\text{2SO}}_{3}\left(g\right),\) the concentrations at equilibrium are [SO2] = 0.90 M, [O2] = 0.35 M, and [SO3] = 1.1 M. What is the value of the equilibrium constant, Kc?
Kc = 4.3
By its definition, the magnitude of an equilibrium constant explicitly reflects the composition of a reaction mixture at equilibrium, and it may be interpreted with regard to the extent of the forward reaction. A reaction exhibiting a large K will reach equilibrium when most of the reactant has been converted to product, whereas a small K indicates the reaction achieves equilibrium after very little reactant has been converted. It’s important to keep in mind that the magnitude of K does not indicate how rapidly or slowly equilibrium will be reached. Some equilibria are established so quickly as to be nearly instantaneous, and others so slowly that no perceptible change is observed over the course of days, years, or longer.
The equilibrium constant for a reaction can be used to predict the behavior of mixtures containing its reactants and/or products. As demonstrated by the sulfur dioxide oxidation process described above, a chemical reaction will proceed in whatever direction is necessary to achieve equilibrium. Comparing Q to K for an equilibrium system of interest allows prediction of what reaction (forward or reverse), if any, will occur.
To further illustrate this important point, consider the reversible reaction shown below:
The bar charts in (Figure) represent changes in reactant and product concentrations for three different reaction mixtures. The reaction quotients for mixtures 1 and 3 are initially lesser than the reaction’s equilibrium constant, so each of these mixtures will experience a net forward reaction to achieve equilibrium. The reaction quotient for mixture 2 is initially greater than the equilibrium constant, so this mixture will proceed in the reverse direction until equilibrium is established.
Predicting the Direction of Reaction Given here are the starting concentrations of reactants and products for three experiments involving this reaction:
Determine in which direction the reaction proceeds as it goes to equilibrium in each of the three experiments shown.
Reactants/Products | Experiment 1 | Experiment 2 | Experiment 3 |
---|---|---|---|
[CO]i | 0.020 M | 0.011 M | 0.0094 M |
[H2O]i | 0.020 M | 0.0011 M | 0.0025 M |
[CO2]i | 0.0040 M | 0.037 M | 0.0015 M |
[H2]i | 0.0040 M | 0.046 M | 0.0076 M |
Solution Experiment 1:
Qc < Kc (0.040 < 0.64)
The reaction will proceed in the forward direction.
Experiment 2:
Qc > Kc (140 > 0.64)
The reaction will proceed in the reverse direction.
Experiment 3:
Qc < Kc (0.48 < 0.64)
The reaction will proceed in the forward direction.
Check Your Learning Calculate the reaction quotient and determine the direction in which each of the following reactions will proceed to reach equilibrium.
(a) A 1.00-L flask containing 0.0500 mol of NO(g), 0.0155 mol of Cl2(g), and 0.500 mol of NOCl:
(b) A 5.0-L flask containing 17 g of NH3, 14 g of N2, and 12 g of H2:
(c) A 2.00-L flask containing 230 g of SO3(g):
(a) Qc = 6.45 \(×\) 103, forward. (b) Qc = 0.23, reverse. (c) Qc = 0, forward.
Homogeneous Equilibria
A homogeneous equilibrium is one in which all reactants and products (and any catalysts, if applicable) are present in the same phase. By this definition, homogeneous equilibria take place in solutions. These solutions are most commonly either liquid or gaseous phases, as shown by the examples below:
These examples all involve aqueous solutions, those in which water functions as the solvent. In the last two examples, water also functions as a reactant, but its concentration is not included in the reaction quotient. The reason for this omission is related to the more rigorous form of the Q (or K) expression mentioned previously in this chapter, in which relative concentrations for liquids and solids are equal to 1 and needn’t be included. Consequently, reaction quotients include concentration or pressure terms only for gaseous and solute species.
The equilibria below all involve gas-phase solutions:
For gas-phase solutions, the equilibrium constant may be expressed in terms of either the molar concentrations (Kc) or partial pressures (Kp) of the reactants and products. A relation between these two K values may be simply derived from the ideal gas equation and the definition of molarity:
where P is partial pressure, V is volume, n is molar amount, R is the gas constant, T is temperature, and M is molar concentration.
For the gas-phase reaction \(m\text{A}+n\text{B}⇌x\text{C}+y\text{D:}\)
And so, the relationship between Kc and KP is
where Δn is the difference in the molar amounts of product and reactant gases, in this case:
Calculation of KP Write the equations relating Kc to KP for each of the following reactions:
(a) \({\text{C}}_{2}{\text{H}}_{6}\left(g\right)⇌{\text{C}}_{2}{\text{H}}_{4}\left(g\right)+{\text{H}}_{2}\left(g\right)\)
(b) \(\text{CO}\left(g\right)+{\text{H}}_{2}\text{O}\left(g\right)⇌{\text{CO}}_{2}\left(g\right)+{\text{H}}_{2}\left(g\right)\)
(c) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)
(d) Kc is equal to 0.28 for the following reaction at 900 °C:
What is KP at this temperature?
Solution (a) Δn = (2) − (1) = 1
KP = Kc (RT)Δn = Kc (RT)1 = Kc (RT)
(b) Δn = (2) − (2) = 0
KP = Kc (RT)Δn = Kc (RT)0 = Kc
(c) Δn = (2) − (1 + 3) = −2
KP = Kc (RT)Δn = Kc (RT)−2 = \(\frac{{K}_{c}}{{\left(RT\right)}^{2}}\)
(d) KP = Kc (RT)Δn = (0.28)[(0.0821)(1173)]−2 = 3.0 \(×\) 10−5
Check Your Learning Write the equations relating Kc to KP for each of the following reactions:
(a) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)
(b) \({\text{N}}_{2}{\text{O}}_{4}\left(g\right)⇌2{\text{NO}}_{2}\left(g\right)\)
(c) \({\text{C}}_{3}{\text{H}}_{8}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌3{\text{CO}}_{2}\left(g\right)+4{\text{H}}_{2}\text{O}\left(g\right)\)
(d) At 227 °C, the following reaction has Kc = 0.0952:
What would be the value of KP at this temperature?
(a) KP = Kc (RT)−1; (b) KP = Kc (RT); (c) KP = Kc (RT); (d) 160 or 1.6 \(×\) 102
Heterogeneous Equilibria
A heterogeneous equilibrium involves reactants and products in two or more different phases, as illustrated by the following examples:
Again, note that concentration terms are only included for gaseous and solute species, as discussed previously.
Two of the above examples include terms for gaseous species only in their equilibrium constants, and so Kp expressions may also be written:
Key Concepts and Summary
The composition of a reaction mixture may be represented by a mathematical function known as the reaction quotient, Q. For a reaction at equilibrium, the composition is constant, and Q is called the equilibrium constant, K.
A homogeneous equilibrium is an equilibrium in which all components are in the same phase. A heterogeneous equilibrium is an equilibrium in which components are in two or more phases.
Key Equations
- \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[\text{C}{\right]}^{x}{\left[\text{D}\right]}^{y}}{\left[\text{A}{\right]}^{m}{\left[\text{B}\right]}^{n}}\phantom{\rule{5em}{0ex}}\text{for the reaction}\phantom{\rule{0.2em}{0ex}}m\text{A}+n\text{B}⇌x\text{C}+y\text{D}\)
- \({Q}_{P}=\phantom{\rule{0.2em}{0ex}}\frac{{\left({P}_{C}\right)}^{x}{\left({P}_{D}\right)}^{y}}{{\left({P}_{A}\right)}^{m}{\left({P}_{B}\right)}^{n}}\phantom{\rule{5em}{0ex}}\text{for the reaction}\phantom{\rule{0.2em}{0ex}}m\text{A}+n\text{B}⇌x\text{C}+y\text{D}\)
- P = MRT
- Kc = Qc at equilibrium
- Kp = Qp at equilibrium
- KP = Kc (RT)Δn
Chemistry End of Chapter Exercises
Explain why there may be an infinite number of values for the reaction quotient of a reaction at a given temperature but there can be only one value for the equilibrium constant at that temperature.
Explain why an equilibrium between Br2(l) and Br2(g) would not be established if the container were not a closed vessel shown in (Figure).
Equilibrium cannot be established between the liquid and the gas phase if the top is removed from the bottle because the system is not closed; one of the components of the equilibrium, the Br2 vapor, would escape from the bottle until all liquid disappeared. Thus, more liquid would evaporate than can condense back from the gas phase to the liquid phase.
If you observe the following reaction at equilibrium, is it possible to tell whether the reaction started with pure NO2 or with pure N2O4?
\(2{\text{NO}}_{2}\left(g\right)⇌{\text{N}}_{2}{\text{O}}_{4}\left(g\right)\)
Among the solubility rules previously discussed is the statement: All chlorides are soluble except Hg2Cl2, AgCl, PbCl2, and CuCl.
(a) Write the expression for the equilibrium constant for the reaction represented by the equation \(\text{AgCl}\left(s\right)⇌{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{Cl}}^{\text{−}}\left(aq\right).\) Is Kc > 1, < 1, or ≈ 1? Explain your answer.
(b) Write the expression for the equilibrium constant for the reaction represented by the equation \({\text{Pb}}^{2+}\left(aq\right)+2{\text{Cl}}^{\text{−}}\left(aq\right)⇌{\text{PbCl}}_{2}\left(s\right).\) Is Kc > 1, < 1, or ≈ 1? Explain your answer.
(a) Kc = [Ag+][Cl−] < 1. AgCl is insoluble; thus, the concentrations of ions are much less than 1 M; (b) \({K}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{1}{\left[{\text{Pb}}^{2+}\right]{\left[{\text{Cl}}^{\text{−}}\right]}^{2}}\) > 1 because PbCl2 is insoluble and formation of the solid will reduce the concentration of ions to a low level (<1 M).
Among the solubility rules previously discussed is the statement: Carbonates, phosphates, borates, and arsenates—except those of the ammonium ion and the alkali metals—are insoluble.
(a) Write the expression for the equilibrium constant for the reaction represented by the equation \({\text{CaCO}}_{3}\left(s\right)⇌{\text{Ca}}^{2+}\left(aq\right)+{\text{CO}}_{3}{}^{2-}\left(\text{aq}\right).\) Is Kc > 1, < 1, or ≈ 1? Explain your answer.
(b) Write the expression for the equilibrium constant for the reaction represented by the equation \(3{\text{Ba}}^{2+}\left(aq\right)+2{\text{PO}}_{4}{}^{3-}\left(aq\right)⇌{\text{Ba}}_{3}{\left({\text{PO}}_{4}\right)}_{2}\left(s\right).\) Is Kc > 1, < 1, or ≈ 1? Explain your answer.
Benzene is one of the compounds used as octane enhancers in unleaded gasoline. It is manufactured by the catalytic conversion of acetylene to benzene: \(3{\text{C}}_{2}{\text{H}}_{2}\left(g\right)\phantom{\rule{0.2em}{0ex}}⇌\phantom{\rule{0.2em}{0ex}}{\text{C}}_{6}{\text{H}}_{6}\left(g\right).\) Which value of Kc would make this reaction most useful commercially? Kc ≈ 0.01, Kc ≈ 1, or Kc ≈ 10. Explain your answer.
Since \({K}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{C}}_{6}{\text{H}}_{6}\right]}{{\left[{\text{C}}_{2}{\text{H}}_{2}\right]}^{3}},\) a value of Kc ≈ 10 means that C6H6 predominates over C2H2. In such a case, the reaction would be commercially feasible if the rate to equilibrium is suitable.
Show that the complete chemical equation, the total ionic equation, and the net ionic equation for the reaction represented by the equation \(\text{KI}\left(aq\right)+{\text{I}}_{2}\left(aq\right)⇌{\text{KI}}_{3}\left(aq\right)\) give the same expression for the reaction quotient. KI3 is composed of the ions K+ and \({\text{I}}_{3}{}^{\text{−}}.\)
For a titration to be effective, the reaction must be rapid and the yield of the reaction must essentially be 100%. Is Kc > 1, < 1, or ≈ 1 for a titration reaction?
Kc > 1
For a precipitation reaction to be useful in a gravimetric analysis, the product of the reaction must be insoluble. Is Kc > 1, < 1, or ≈ 1 for a useful precipitation reaction?
Write the mathematical expression for the reaction quotient, Qc, for each of the following reactions:
(a) \({\text{CH}}_{4}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌{\text{CH}}_{3}\text{Cl}\left(g\right)+\text{HCl}\left(g\right)\)
(b) \({\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\)
(c) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)
(d) \({\text{BaSO}}_{3}\left(s\right)⇌\text{BaO}\left(s\right)+{\text{SO}}_{2}\left(g\right)\)
(e) \({\text{P}}_{4}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌{\text{P}}_{4}{\text{O}}_{10}\left(s\right)\)
(f) \({\text{Br}}_{2}\left(g\right)⇌2\text{Br}\left(g\right)\)
(g) \({\text{CH}}_{4}\left(g\right)+2{\text{O}}_{2}\left(g\right)⇌{\text{CO}}_{2}\left(g\right)+2{\text{H}}_{2}\text{O}\left(l\right)\)
(h) \({\text{CuSO}}_{4}\text{·}5{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{CuSO}}_{4}\left(s\right)+5{\text{H}}_{2}\text{O}\left(g\right)\)
(a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{CH}}_{3}\text{Cl}\right]\left[\text{HCl}\right]}{\left[{\text{CH}}_{4}\right]\left[{\text{Cl}}_{2}\right]};\) (b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[\text{NO}\right]}^{2}}{\left[{\text{N}}_{2}\right]\phantom{\rule{0.2em}{0ex}}\left[{\text{O}}_{2}\right]};\) (c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{SO}}_{3}\right]}^{2}}{{\left[{\text{SO}}_{2}\right]}^{2}\left[{\text{O}}_{2}\right]};\) (d) Qc = [SO2]; (e) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{1}{\left[{\text{P}}_{4}\right]{\left[{\text{O}}_{2}\right]}^{5}};\) (f) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[\text{Br}\right]}^{2}}{\left[{\text{Br}}_{2}\right]};\) (g) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{CO}}_{2}\right]}{\left[{\text{CH}}_{4}\right]{\left[{\text{O}}_{2}\right]}^{2}};\) (h) Qc = [H2O]5
Write the mathematical expression for the reaction quotient, Qc, for each of the following reactions:
(a) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)
(b) \(4{\text{NH}}_{3}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌4\text{NO}\left(g\right)+6{\text{H}}_{2}\text{O}\left(g\right)\)
(c) \({\text{N}}_{2}{\text{O}}_{4}\left(g\right)⇌2{\text{NO}}_{2}\left(g\right)\)
(d) \({\text{CO}}_{2}\left(g\right)+{\text{H}}_{2}\left(g\right)⇌\text{CO}\left(g\right)+{\text{H}}_{2}\text{O}\left(g\right)\)
(e) \({\text{NH}}_{4}\text{Cl}\left(s\right)⇌{\text{NH}}_{3}\left(g\right)+\text{HCl}\left(g\right)\)
(f) \(2\text{Pb}{\left({\text{NO}}_{3}\right)}_{2}\left(s\right)⇌2\text{PbO}\left(s\right)+4{\text{NO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\)
(g) \(2{\text{H}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{H}}_{2}\text{O}\left(l\right)\)
(h) \({\text{S}}_{8}\left(g\right)⇌8\text{S}\left(g\right)\)
The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.
\(\begin{array}{cccc}\text{(a)}\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\hfill & & & {K}_{c}=17;\left[{\text{NH}}_{3}\right]=0.20\phantom{\rule{0.2em}{0ex}}M,\left[{\text{N}}_{2}\right]=1.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{H}}_{2}\right]=1.00\phantom{\rule{0.2em}{0ex}}M\hfill \\ \text{(b)}\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\hfill & & & {K}_{P}=6.8\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};{\text{NH}}_{3}=3.0\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{N}}_{2}=2.0\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{H}}_{2}=1.0\phantom{\rule{0.2em}{0ex}}\text{atm}\hfill \\ \text{(c)}\phantom{\rule{0.2em}{0ex}}2{\text{SO}}_{3}\left(g\right)\phantom{\rule{0.2em}{0ex}}⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\hfill & & & {K}_{c}=0.230;\left[{\text{SO}}_{3}\right]=0.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{SO}}_{2}\right]=1.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{O}}_{2}\right]=1.00\phantom{\rule{0.2em}{0ex}}M\hfill \\ \text{(d)}\phantom{\rule{0.2em}{0ex}}2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\hfill & & & {K}_{P}=16.5;{\text{SO}}_{3}=1.00\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{SO}}_{2}=1.00\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{O}}_{2}=1.00\phantom{\rule{0.2em}{0ex}}\text{atm}\hfill \\ \text{(e)}\phantom{\rule{0.2em}{0ex}}2\text{NO}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌2\text{NOCl}\left(g\right)\hfill & & & {K}_{c}=4.6\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};\left[\text{NO}\right]=1.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{Cl}}_{2}\right]=1.00\phantom{\rule{0.2em}{0ex}}M,\left[\text{NOCl}\right]=0\phantom{\rule{0.2em}{0ex}}M\hfill \\ \text{(f)}\phantom{\rule{0.2em}{0ex}}{\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\hfill & & & {K}_{P}=0.050;\text{NO}=10.0\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{N}}_{2}={\text{O}}_{2}=\text{5 atm}\hfill \end{array}\)
(a) Qc 25 proceeds left; (b) QP 0.22 proceeds right; (c) Qc undefined proceeds left; (d) QP 1.00 proceeds right; (e) QP 0 proceeds right; (f) Qc 4 proceeds left
The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.
\(\begin{array}{cccc}\text{(a)}\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\hfill & & & {K}_{c}=17;\left[{\text{NH}}_{3}\right]=0.50\phantom{\rule{0.2em}{0ex}}M,\left[{\text{N}}_{2}\right]=0.15\phantom{\rule{0.2em}{0ex}}M,\left[{\text{H}}_{2}\right]=0.12\phantom{\rule{0.2em}{0ex}}M\hfill \\ \text{(b)}\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\hfill & & & {K}_{P}=6.8\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};{\text{NH}}_{3}=2.00\phantom{\rule{0.2em}{0ex}}\text{atm},{\text{N}}_{2}=\text{10.00 atm},{\text{H}}_{2}=\text{10.00 atm}\hfill \\ \text{(c)}\phantom{\rule{0.2em}{0ex}}2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\hfill & & & {K}_{c}=0.230;\left[{\text{SO}}_{3}\right]=2.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{SO}}_{2}\right]=2.00\phantom{\rule{0.2em}{0ex}}M,\left[{\text{O}}_{2}\right]=2.00\phantom{\rule{0.2em}{0ex}}M\hfill \\ \text{(d)}\phantom{\rule{0.2em}{0ex}}2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\hfill & & & {K}_{P}=6.5\phantom{\rule{0.2em}{0ex}}\text{atm};{\text{SO}}_{2}=\text{1.00 atm},{\text{O}}_{2}=\text{1.130 atm},{\text{SO}}_{3}=\text{0 atm}\hfill \\ \text{(e)}\phantom{\rule{0.2em}{0ex}}2\text{NO}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌2\text{NOCl}\left(g\right)\hfill & & & {K}_{P}=2.5\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{3};\text{NO}=\text{1.00 atm},{\text{Cl}}_{2}=\text{1.00 atm},\text{NOCl}=\text{0 atm}\hfill \\ \text{(f)}\phantom{\rule{0.2em}{0ex}}{\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\hfill & & & {K}_{c}=0.050;\left[{\text{N}}_{2}\right]=0.100\phantom{\rule{0.2em}{0ex}}M,\left[{\text{O}}_{2}\right]=0.200\phantom{\rule{0.2em}{0ex}}M,\left[\text{NO}\right]=1.00\phantom{\rule{0.2em}{0ex}}M\hfill \end{array}\)
The following reaction has KP = 4.50 \(×\) 10−5 at 720 K.
\({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)
If a reaction vessel is filled with each gas to the partial pressures listed, in which direction will it shift to reach equilibrium? P(NH3) = 93 atm, P(N2) = 48 atm, and P(H2) = 52 atm
The system will shift toward the reactants to reach equilibrium.
Determine if the following system is at equilibrium. If not, in which direction will the system need to shift to reach equilibrium?
\({\text{SO}}_{2}{\text{Cl}}_{2}\left(g\right)⇌{\text{SO}}_{2}\left(g\right)+{\text{Cl}}_{2}\left(g\right)\)
[SO2Cl2] = 0.12 M, [Cl2] = 0.16 M and [SO2] = 0.050 M. Kc for the reaction is 0.078.
Which of the systems described in (Figure) are homogeneous equilibria? Which are heterogeneous equilibria?
(a) homogenous; (b) homogenous; (c) homogenous; (d) heterogeneous; (e) heterogeneous; (f) homogenous; (g) heterogeneous; (h) heterogeneous
Which of the systems described in (Figure) are homogeneous equilibria? Which are heterogeneous equilibria?
For which of the reactions in (Figure) does Kc (calculated using concentrations) equal KP (calculated using pressures)?
This situation occurs in (a) and (b).
For which of the reactions in (Figure) does Kc (calculated using concentrations) equal KP (calculated using pressures)?
Convert the values of Kc to values of KP or the values of KP to values of Kc.
\(\begin{array}{cccc}\text{(a)}\phantom{\rule{0.2em}{0ex}}{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\hfill & & & {K}_{c}=0.50\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}400\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(b)}\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\left(g\right)+{\text{I}}_{2}\left(g\right)⇌2\text{HI}\left(g\right)\hfill & & & {K}_{c}=50.2\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}448\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(c)}\phantom{\rule{0.2em}{0ex}}{\text{Na}}_{2}{\text{SO}}_{4}\text{·}10{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{Na}}_{2}{\text{SO}}_{4}\left(s\right)+10{\text{H}}_{2}\text{O}\left(g\right)\hfill & & & {K}_{P}=4.08\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-25}\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(d)}\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\hfill & & & {K}_{P}=0.122\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}50\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \end{array}\)
(a) KP = 1.6 \(×\) 10−4; (b) KP = 50.2; (c) Kc = 5.34 \(×\) 10−39; (d) Kc = 4.60 \(×\) 10−3
Convert the values of Kc to values of KP or the values of KP to values of Kc.
\(\begin{array}{cccc}\text{(a)}\phantom{\rule{0.2em}{0ex}}{\text{Cl}}_{2}\left(g\right)+{\text{Br}}_{2}\left(g\right)⇌2\text{BrCl}\left(g\right)\hfill & & & {K}_{c}=4.7\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-2}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(b)}\phantom{\rule{0.2em}{0ex}}2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\hfill & & & {K}_{P}=48.2\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}500\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(c)}\phantom{\rule{0.2em}{0ex}}{\text{CaCl}}_{2}\text{·}6{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{CaCl}}_{2}\left(s\right)+6{\text{H}}_{2}\text{O}\left(g\right)\hfill & & & {K}_{P}=5.09\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-44}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \\ \text{(d)}\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\hfill & & & {K}_{P}=0.196\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}60\phantom{\rule{0.2em}{0ex}}\text{°C}\hfill \end{array}\)
What is the value of the equilibrium constant expression for the change \({\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\) at 30 °C? (See Appendix E.)
\({K}_{P}={P}_{{\text{H}}_{2}\text{O}}=0.042.\)
Write the expression of the reaction quotient for the ionization of HOCN in water.
Write the reaction quotient expression for the ionization of NH3 in water.
\({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{NH}}_{4}{}^{\text{+}}\right]\left[{\text{OH}}^{\text{−}}\right]}{\left[{\text{HN}}_{3}\right]}\)
What is the approximate value of the equilibrium constant KP for the change \({\text{C}}_{2}{\text{H}}_{5}{\text{OC}}_{2}{\text{H}}_{5}\left(l\right)⇌{\text{C}}_{2}{\text{H}}_{5}{\text{OC}}_{2}{\text{H}}_{5}\left(g\right)\) at 25 °C. (The equilibrium vapor pressure for this substance is 570 torr at 25 °C.)
Glossary
- equilibrium constant (K)
- value of the reaction quotient for a system at equilibrium; may be expressed using concentrations (Kc) or partial pressures (Kp)
- heterogeneous equilibria
- equilibria in which reactants and products occupy two or more different phases
- homogeneous equilibria
- equilibria in which all reactants and products occupy the same phase
- law of mass action
- when a reversible reaction has attained equilibrium at a given temperature, the reaction quotient remains constant
- reaction quotient (Q)
- mathematical function describing the relative amounts of reactants and products in a reaction mixture; may be expressed in terms of concentrations (Qc) or pressures (Qp)